aluminum coil

The difference between 5052 and 5083 Both 5052 and 5083 are Marine grade aluminum , and the metal content, especially the Mn and Mg content, is very different, and the 5083 has a higher tensile strength and yield strength than the 5052. Si Fe Cu Mn Mg Cr Zn 5052 0+ 0.4 0.2 0.2 0.5-1.1 0.1 0.25 5083 0.4 0.4 0.1 0.3-1.0 4.0-4.9 0.05-0.25 0.25 Five series: 5000 series aluminum alloy represents 5052 , 5005, 5083 , 5A05 series. The weight of the aluminum-magnesium alloy is lower than the other series under the same area. It is also widely used in conventional industries. In China, 5000 (such as 5005) series of aluminum plates belong to one of the more mature aluminum plate series. The main features are low density, high tensile strength, high elongation and good fatigue strength, but they cannot be heat treated. 5052 has good formability, corrosion resistance, candle resistance, fatigue strength and moderate static strength. Used...

With the change of consumption concept, the improvement of consumption level, the improvement of food and drug safety management, and the acceleration of industrialization process, aluminum lunch boxes, aluminum foil paper, aluminum plate trays, wine packaging packaging, aluminum plate aerosol cans, aluminum oil storage tanks, etc. The market prospects are large. (2) Application areas with significant social benefits to be promoted Aluminum plate bridges, aluminum plate flood walls, etc., although not used, have obvious social benefits. The materials of China's flyovers are mainly made of steel and other non-aluminum sheets, while the aluminum bridges that have been built account for less than 2%. Aluminum plate flyover has been widely recognized and recognized for its light weight, high strength, beautiful appearance, corrosion resistance, recyclability, and environmental protection. Not only can the flyover be made of aluminum, but if the road bridge can gradually increase...

3003 alloy is an aluminum alloy with manganese as the main alloying element. It has good corrosion resistance to atmospheric, fresh water, sea water, food, organic acid, gasoline, neutral inorganic salt aqueous solution, etc., and corrosion resistance in dilute acid. Very good, so there is a reputation of "king of rust". The chemical composition of the 3003 alloy is: silicon Si: 0.60 iron Fe: 0.70 copper Cu: 0.05-0.20 manganese Mn: 1.0-1.5 zinc Zn: 0.10 Other: single 0.05, total 0.15 aluminum Al: balance. The strength of the 3003 aluminum coil is not high, and the strength is slightly higher. It is used in industrial pure aluminum and cannot be heat-treated. Therefore, cold working is often used to improve its mechanical properties: high plasticity in the annealed state and plasticity in the semi-cold hardening. It is still good, the plasticity is low during cold work hardening, the corrosion resistance is good, the weldability is good, and the machinability is poor. It ...